Browsing by Author "Hahn, Michael (35322225300)"

In this study we analyzed the trabecular bone micro-architecture in the inferomedial and superolateral subregions of the femoral neck in a group with hip fractures and a control group of elderly women, with aim to clarify the micro-structural basis of bone fragility.Proximal femora from 29 Caucasian female cadavers were collected at Institute of Forensic Medicine in Belgrade (15 women with hip fracture: age 79.5. ±. 8.5. yrs.; and 14 women without hip fractures: age 74.1. ±. 9.3. yrs.). The femoral neck section was scanned in dry conditions using a micro-computed tomography (Scanco μCT 40), at 70. kV, 114. μA, 300. ms integration time, 36. μm resolution, isotropic, 1024. ×. 1024. pixels per slice, automatically evaluating trabecular micro-architecture using the built-in program of the micro-CT with direct 3D morphometry. The samples were foam padded to avoid any movement artifacts during scanning.Analysis of the neck section in the fracture group compared to the control cases demonstrated significantly lower bone volume fraction (mean: 6.3% vs. 11.2%, p=0.002), lower connectivity density (0.33/mm 3 vs. 0.74/mm 3, p=0.019) and higher trabecular separation (0.87mm vs. 0.83mm, p=0.030). Division into the superolateral and inferomedial regions of interest revealed that the superolateral neck displayed even more differences in micro-architectural properties between the fracture and non-fracture groups. Namely, while in the inferomedial neck only bone volume fraction and degree of anisotropy displayed significant inter-group variability (lower BV/TV with higher degree of anisotropy in the fracture group), in the superolateral neck almost all parameters were different between the fracture cases and the controls, where the fracture group showed a lower trabecular bone volume fraction (3.6% vs. 8.2%, p=0.001), lower connectivity (0.21 vs. 0.63/mm 3, p=0.008), more rod like trabecular structure (SMI: 2.94 vs. 2.62, p=0.049), higher separation and the thinned trabeculae (Tb.Sp: 0.89 vs. 0.85mm, p=0.013; Tb.Th: 0.17 vs. 0.20mm, p=0.05). In addition, after adjusting for the effects of BV/TV, the majority of differences disappeared, demonstrating that the bone loss manifests itself via the changes in micro-architectural parameters: trabecular thinning, rising the spacing between individual trabeculae, reducing trabecular connectivity and accentuating trabecular perforations leading to predominance of rod-like trabecular elements.Preferential impairment of the superolateral neck trabecular structure and organization in women with hip fracture reveals the region-dependent micro-structural basis of bone fragility in elderly women. © 2011 Elsevier Inc.

In this study we analyzed the trabecular bone micro-architecture in the inferomedial and superolateral subregions of the femoral neck in a group with hip fractures and a control group of elderly women, with aim to clarify the micro-structural basis of bone fragility.Proximal femora from 29 Caucasian female cadavers were collected at Institute of Forensic Medicine in Belgrade (15 women with hip fracture: age 79.5. ±. 8.5. yrs.; and 14 women without hip fractures: age 74.1. ±. 9.3. yrs.). The femoral neck section was scanned in dry conditions using a micro-computed tomography (Scanco μCT 40), at 70. kV, 114. μA, 300. ms integration time, 36. μm resolution, isotropic, 1024. ×. 1024. pixels per slice, automatically evaluating trabecular micro-architecture using the built-in program of the micro-CT with direct 3D morphometry. The samples were foam padded to avoid any movement artifacts during scanning.Analysis of the neck section in the fracture group compared to the control cases demonstrated significantly lower bone volume fraction (mean: 6.3% vs. 11.2%, p=0.002), lower connectivity density (0.33/mm 3 vs. 0.74/mm 3, p=0.019) and higher trabecular separation (0.87mm vs. 0.83mm, p=0.030). Division into the superolateral and inferomedial regions of interest revealed that the superolateral neck displayed even more differences in micro-architectural properties between the fracture and non-fracture groups. Namely, while in the inferomedial neck only bone volume fraction and degree of anisotropy displayed significant inter-group variability (lower BV/TV with higher degree of anisotropy in the fracture group), in the superolateral neck almost all parameters were different between the fracture cases and the controls, where the fracture group showed a lower trabecular bone volume fraction (3.6% vs. 8.2%, p=0.001), lower connectivity (0.21 vs. 0.63/mm 3, p=0.008), more rod like trabecular structure (SMI: 2.94 vs. 2.62, p=0.049), higher separation and the thinned trabeculae (Tb.Sp: 0.89 vs. 0.85mm, p=0.013; Tb.Th: 0.17 vs. 0.20mm, p=0.05). In addition, after adjusting for the effects of BV/TV, the majority of differences disappeared, demonstrating that the bone loss manifests itself via the changes in micro-architectural parameters: trabecular thinning, rising the spacing between individual trabeculae, reducing trabecular connectivity and accentuating trabecular perforations leading to predominance of rod-like trabecular elements.Preferential impairment of the superolateral neck trabecular structure and organization in women with hip fracture reveals the region-dependent micro-structural basis of bone fragility in elderly women. © 2011 Elsevier Inc.

Although the concept of the occlusal load transfer through the facial skeleton along the buttresses has been extensively studied, there has been no study to link microarchitecture of the mid-facial bones to the occlusal load distribution. The aim of this study was to analyze micro-structural properties of the mid-facial bones in relation to occlusal stress. The study was performed by combining the three-dimensional finite element analysis (3D FEA) and micro-computed tomography analysis (micro-CT). Clenching was simulated on the computer model of the adult male human skull which was also used as a source of bone specimens. After the FEA was run, stress was measured at the specific sites in cortical shell and trabecular bone of the model along and between the buttresses. From the corresponding sites on the skull, twenty-five cortical and thirteen cancellous bone specimens were harvested. The specimens were classified into high stress or low stress group based on the stress levels measured via the FEA. Micro-architecture of each specimen was assessed by micro-CT. In the high stress group, cortical bone showed a tendency toward greater thickness and density, lower porosity, and greater pore separation. Stress-related differences in microstructure between the groups were more pronounced in trabecular bone, which showed significantly greater bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) in the high stress group. Our results suggest that the mid-facial bones in the adult dentate male skull exhibit regional variations in cortical and trabecular bone micro-architecture that could be a consequence of different occlusal stress. © 2014 Elsevier Inc.

Although the concept of the occlusal load transfer through the facial skeleton along the buttresses has been extensively studied, there has been no study to link microarchitecture of the mid-facial bones to the occlusal load distribution. The aim of this study was to analyze micro-structural properties of the mid-facial bones in relation to occlusal stress. The study was performed by combining the three-dimensional finite element analysis (3D FEA) and micro-computed tomography analysis (micro-CT). Clenching was simulated on the computer model of the adult male human skull which was also used as a source of bone specimens. After the FEA was run, stress was measured at the specific sites in cortical shell and trabecular bone of the model along and between the buttresses. From the corresponding sites on the skull, twenty-five cortical and thirteen cancellous bone specimens were harvested. The specimens were classified into high stress or low stress group based on the stress levels measured via the FEA. Micro-architecture of each specimen was assessed by micro-CT. In the high stress group, cortical bone showed a tendency toward greater thickness and density, lower porosity, and greater pore separation. Stress-related differences in microstructure between the groups were more pronounced in trabecular bone, which showed significantly greater bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) in the high stress group. Our results suggest that the mid-facial bones in the adult dentate male skull exhibit regional variations in cortical and trabecular bone micro-architecture that could be a consequence of different occlusal stress. © 2014 Elsevier Inc.

Objectives: Parallel with body growth and development, bone structure in non-adults is reorganized to achieve the particular design observed in mature individuals. We traced the changes in three-dimensional trabecular microarchitectural design during the phases of locomotor maturation to clarify how human bone adapts to mechanical demands. Materials and Methods: Micro-CT was performed on biomechanically-relevant subregions of the proximal femur (medial, intermediate and lateral neck regions, intertrochanteric region, metaphyseal region) from early postnatal period to late childhood. Results: Developmental patterns of trabecular microarchitecture showed that gestationally overproduced bone present at birth underwent the most dramatic reduction during the first year, followed by a reversing trend in some of the quantitative parameters (e.g., bone volume fraction, trabecular anisotropy). Certain regional anisotropy already present at birth is further accentuated into the childhood suggesting an adaptation to differential loading environments. Trabecular eccentricity in the femoral neck was particularly accentuated during childhood, giving the medial neck—the site mostly loaded in walking—superior microarchitectural design (high bone volume fraction and anisotropy, the earliest appearance and predominance of plate- and honeycomb-shaped trabeculae). Discussion: While providing quantitative data on how bone microarchitecture adapts to increasing mechanical demands occurring during the phases of locomotor maturation, the study reveals how regional anisotropy develops in the proximal femur to ensure a functional and competent bone structure. Decomposing the region-specific patterns of bone mass accrual is important in understanding skeletal adaptations to bipedalism, as well for understanding why fractures often occur location-dependent, both in pediatric and elderly individuals. © 2017 Wiley Periodicals, Inc.

Objectives: Parallel with body growth and development, bone structure in non-adults is reorganized to achieve the particular design observed in mature individuals. We traced the changes in three-dimensional trabecular microarchitectural design during the phases of locomotor maturation to clarify how human bone adapts to mechanical demands. Materials and Methods: Micro-CT was performed on biomechanically-relevant subregions of the proximal femur (medial, intermediate and lateral neck regions, intertrochanteric region, metaphyseal region) from early postnatal period to late childhood. Results: Developmental patterns of trabecular microarchitecture showed that gestationally overproduced bone present at birth underwent the most dramatic reduction during the first year, followed by a reversing trend in some of the quantitative parameters (e.g., bone volume fraction, trabecular anisotropy). Certain regional anisotropy already present at birth is further accentuated into the childhood suggesting an adaptation to differential loading environments. Trabecular eccentricity in the femoral neck was particularly accentuated during childhood, giving the medial neck—the site mostly loaded in walking—superior microarchitectural design (high bone volume fraction and anisotropy, the earliest appearance and predominance of plate- and honeycomb-shaped trabeculae). Discussion: While providing quantitative data on how bone microarchitecture adapts to increasing mechanical demands occurring during the phases of locomotor maturation, the study reveals how regional anisotropy develops in the proximal femur to ensure a functional and competent bone structure. Decomposing the region-specific patterns of bone mass accrual is important in understanding skeletal adaptations to bipedalism, as well for understanding why fractures often occur location-dependent, both in pediatric and elderly individuals. © 2017 Wiley Periodicals, Inc.

Despite evident interest in age-related bone changes, data on regional differences within the proximal femur are scarce. To date, there has been no comprehensive study on site-specific age-related changes in the trabecular architecture of three biomechanically important femoral subregions (medial neck, lateral neck, and intertrochanteric region) for both genders. In this study we investigated agerelated deterioration in the trabecular architecture of those three subregions of the femoral neck for both genders. The research sample included 52 proximal femora (26 males, 26 females; age range, 26-96 years) from Forensic Department at University of Belgrade. Bone sections from the three regions of interest were scanned by micro-CT at University of Hamburg. The study revealed that proximal femoral microarchitecture cannot be perceived as homogeneous and, more importantly, that the aging process is not uniform. Besides the initial intersite differences, microarchitecture changed differently with increasing age, maintaining significant differences between the regions. In addition, we observed a different aging pattern between genders: deterioration was most significant in the intertrochanteric region in women, while the lateral neck was most affected in men. This finding supports epidemiological data about the differential occurrence of cervical vs. trochanteric fractures in aging males and females. In conclusion, the aging process in the proximal femur cannot be regarded as a simple function of quantitative bone loss but, rather, as an alteration of specific architecture that may degrade bone strength. © 2009 Springer Science+Business Media, LLC.

Despite evident interest in age-related bone changes, data on regional differences within the proximal femur are scarce. To date, there has been no comprehensive study on site-specific age-related changes in the trabecular architecture of three biomechanically important femoral subregions (medial neck, lateral neck, and intertrochanteric region) for both genders. In this study we investigated agerelated deterioration in the trabecular architecture of those three subregions of the femoral neck for both genders. The research sample included 52 proximal femora (26 males, 26 females; age range, 26-96 years) from Forensic Department at University of Belgrade. Bone sections from the three regions of interest were scanned by micro-CT at University of Hamburg. The study revealed that proximal femoral microarchitecture cannot be perceived as homogeneous and, more importantly, that the aging process is not uniform. Besides the initial intersite differences, microarchitecture changed differently with increasing age, maintaining significant differences between the regions. In addition, we observed a different aging pattern between genders: deterioration was most significant in the intertrochanteric region in women, while the lateral neck was most affected in men. This finding supports epidemiological data about the differential occurrence of cervical vs. trochanteric fractures in aging males and females. In conclusion, the aging process in the proximal femur cannot be regarded as a simple function of quantitative bone loss but, rather, as an alteration of specific architecture that may degrade bone strength. © 2009 Springer Science+Business Media, LLC.