Browsing by Author "Antic, Svetlana (8243955900)"

Introduction: Chronic rhinosinusitis (CRS) is inflammation of the nasal cavity and paranasal sinus mucosa. The aim of this study was to examine which of the available radiological and clinical parameters is the best indicator of the CRS severity. Methodology: In order to classify CRS, we used both a subjective assessment tool such as SNOT-22 questionnaire, as well as an objective tool such as clinical examination. We introduced three forms of CRS (mild, moderate and severe). Within these groups, we evaluated the computerized tomography (CT) parameters used as an indicator of bone remodeling, the Lund-Mackay score (LMS), CT properties of the soft tissue content in the maxillary sinuses, presence of nasal polypus (NP), presence of fungal infection and parameters indicating allergic status. Results: Frequencies of NP, positive eosinophil count, presence of fungi, areas of high attenuation, and duration of CRS and LMS significantly increased with the increased severity of CRS. Anterior wall thickness and density increased in the severe forms of CRS in the group assessed by SNOT-22. Positive correlation was detected between LMS and maximal density of sinus content and between duration of CRS and anterior wall thickness. Conclusions: Morphological changes of sinus wall detected in CT could be a useful indicator of CRS severity. Changes in bone morphology are more likely to occur in patients with longer-lasting CRS. The presence of fungi, allergic inflammation of any origin and nasal polypus potentiates more severe forms of CRS both clinically and subjectively. Copyright © 2023 Markovic-Vasiljkovic et al.

Introduction: Chronic rhinosinusitis (CRS) is inflammation of the nasal cavity and paranasal sinus mucosa. The aim of this study was to examine which of the available radiological and clinical parameters is the best indicator of the CRS severity. Methodology: In order to classify CRS, we used both a subjective assessment tool such as SNOT-22 questionnaire, as well as an objective tool such as clinical examination. We introduced three forms of CRS (mild, moderate and severe). Within these groups, we evaluated the computerized tomography (CT) parameters used as an indicator of bone remodeling, the Lund-Mackay score (LMS), CT properties of the soft tissue content in the maxillary sinuses, presence of nasal polypus (NP), presence of fungal infection and parameters indicating allergic status. Results: Frequencies of NP, positive eosinophil count, presence of fungi, areas of high attenuation, and duration of CRS and LMS significantly increased with the increased severity of CRS. Anterior wall thickness and density increased in the severe forms of CRS in the group assessed by SNOT-22. Positive correlation was detected between LMS and maximal density of sinus content and between duration of CRS and anterior wall thickness. Conclusions: Morphological changes of sinus wall detected in CT could be a useful indicator of CRS severity. Changes in bone morphology are more likely to occur in patients with longer-lasting CRS. The presence of fungi, allergic inflammation of any origin and nasal polypus potentiates more severe forms of CRS both clinically and subjectively. Copyright © 2023 Markovic-Vasiljkovic et al.

Background: This prospective study is focused on evaluating radiological properties of AFRS. We analysed specific CT features related to the presence of AFRS, as well as explored the possible usefulness of the texture image analysis (TIA) as an additional diagnostical parameter. Methods: The CT images of maxillary sinuses of 37 adult patients diagnosed with chronic rhinosinusitis were analysed for homogeneity, high-attenuation areas, density of the soft tissue mass, bony wall thickness and density. TIA included assessment of uniformity, contrast, homogeneity and entropy of sinus content. Results: In the F+ group, soft tissue mass was significantly more non-homogeneous, high-attenuation areas were more prevalent, while soft tissue densities were higher. The sinus wall showed a tendency towards decreased thickness and significantly higher density in the F+ group. Among TIA parameters only homogeneity was significantly lower in the F+ group. Conclusions: Presence of fungi should be suspected when the sinus is filled with a non-homogenous soft tissue content of a high CT density not necessarily presented as clearly visible hyperattenuation material. Additional criteria in radiological diagnostics of AFRS should encompass assessment of sinus bony wall density. TIA may serve as a tool for quantitative assessment of subjective CT features such as homogeneity of the soft tissue mass for investigative purposes. However, other TIA parameters showed limited potential. © 2022 Wiley-VCH GmbH.

The aim of the present study was to investigate the influences of the presence and position of a lower third molar (M3) on the fragility of mandibular angle and condyle, using finite element analysis. From computed tomographic scans of a human mandible with normally erupted M3, two additional virtual models were generated: a mandibular model with partially impacted M3 and a model without M3. Two cases of impact were considered: a frontal and a lateral blow. The results are based on the chromatic analysis of the distributed von Mises and principal stresses, and calculation of their failure indices. In the frontal blow, the angle region showed the highest stress in the case with partially impacted M3, and the condylar region in the case without M3. Compressive stresses were dominant but caused no failure. Tensile stresses were recorded in the retromolar areas, but caused failure only in the case with partially impacted M3. In the lateral blow, the stress concentrated at the point of impact, in the ipsilateral and contralateral angle and condylar regions. The highest stresses were recorded in the case with partially impacted M3. Tensile stresses caused the failure on the ipsilateral side, whereas compressive stresses on the contralateral side. © 2015 European Association for Cranio-Maxillo-Facial Surgery.

The aim of the present study was to investigate the influences of the presence and position of a lower third molar (M3) on the fragility of mandibular angle and condyle, using finite element analysis. From computed tomographic scans of a human mandible with normally erupted M3, two additional virtual models were generated: a mandibular model with partially impacted M3 and a model without M3. Two cases of impact were considered: a frontal and a lateral blow. The results are based on the chromatic analysis of the distributed von Mises and principal stresses, and calculation of their failure indices. In the frontal blow, the angle region showed the highest stress in the case with partially impacted M3, and the condylar region in the case without M3. Compressive stresses were dominant but caused no failure. Tensile stresses were recorded in the retromolar areas, but caused failure only in the case with partially impacted M3. In the lateral blow, the stress concentrated at the point of impact, in the ipsilateral and contralateral angle and condylar regions. The highest stresses were recorded in the case with partially impacted M3. Tensile stresses caused the failure on the ipsilateral side, whereas compressive stresses on the contralateral side. © 2015 European Association for Cranio-Maxillo-Facial Surgery.

Background: Developmental disturbances of the paranasal sinuses are proposed as the cause of osteoma. We examined whether such disturbances may result in the frequent presence of anatomical variations of the paranasal sinuses in patients with osteoma. Methodology/Principal: The study was performed retrospectively on 2,820 patients subjected to CT examination during 2005 - 2011. Demographic and CT characteristics of osteoma, and associated pathological lndings were evaluated for 104 patients with diagnosed osteoma. The presence of anatomical variations was assessed for 51 osteoma patients with a complete medical history, and for 1,233 patients from a control group. Results: The prevalence of osteomas was found to be 3.69%, with male to female ratio 1.08:1. The frontal sinus was most commonly aected. The presence of anatomical variations was more frequent in patients with osteoma than in controls, with signi!cant dierences con!rmed for the sphenomaxillary plate, infraorbital cell, and crista galli pneumatization. Conclusions: The paranasal sinus osteoma is associated with higher prevalence of anatomical variations. This can be explained either by the stronger in#uence of genetic and/or environmental factors on the development of the paranasal sinuses in patients with osteoma, or by their higher susceptibility to abovementioned factors.

Background: We compare the health-related quality of life (QoL) of patients with incision hernias before and after surgery with two different techniques. Methods: In this prospective randomized study, the study population consisted of all patients who underwent the first surgical incisional hernias repair during the 1-year study period. Patients who met the criteria for inclusion in the study were randomized into two groups: the first group consisted of patients operated by an open Rives sublay technique, and the second group included patients operated by a segregation component technique. The change in the quality of life before and 6 months after surgery was assessed using two general (Short form of SF-36 questionnaires and European Quality of Life Questionnaire—EQ-5D-3L), and three specific hernia questionnaires (Hernia Related Quality of Life Survey-HerQles, Eura HS Quality of Life Scale—EuraHS QoL, and Carolinas Comfort Scale—CCS). Results: A total of 93 patients were included in the study. Patients operated on by the Rives technique had a better role physical score before surgery, according to the SF-36 tool, although this was not found after surgery. The postoperative QoL measured with each scale of all questionnaires was significantly better after surgery. Comparing two groups of patients after surgery, only the pain domain of the EuraHS Qol questionnaire was worse in patients operated by a segregation component technique. Conclusion: Both techniques improve the quality of life after surgery. Generic QoL questionnaires showed no difference in the quality of life compared to repair technique but specific hernia-related questionnaires showed differences. © 2022, The Author(s).

The aim of the present study was to develop a new method to reconstruct damaged metatarsophalangeal joint (MTPJ) of Homo naledi's fossil and to deepen the understanding of the first metatarsal head (FMH) morphological adaptation in different gait patterns. To this purpose three methods were introduced. The first served to compare the anthropometric linear and volumetric measurements of Homo naledi's MTPJ to that of 10 various athletes. The second was employed to measure curvature diameter in FMH's medial and lateral grooves for sesamoid bones. The third was used to determine the parallelism between medial and lateral FMH grooves. The anthropometric measurements of middle-distance runner to the greatest extent mimicked that of Homo naledi. Thus, it was used to successfully reconstruct the damaged Homo naledi's MTPJ. The highest curvature diameter of medial FMH groove was found in Homo naledi, while in lateral FMH groove it was the highest in volleyball player, suggesting their increased bear loading. The parallelism of medial and lateral FMH grooves was observed only in Homo naledi, while in investigated athletes it was dis-parallel. Athletes' dis-paralleled structures make first MTPJ simple flexion movement a complicated one: not rotating about one axis, but aboutmany, whichmay result in bringing a negative effect on running. In conclusion, the presented method for the reconstruction of the damaged foot bone paves the way for morphological and structural analysis of modern population and fossil hominins' gait pattern. © 2019 Fan, Antonijević, Antic, Li, Liu, Li, Djuric and Fan.

The aim of the present study was to develop a new method to reconstruct damaged metatarsophalangeal joint (MTPJ) of Homo naledi's fossil and to deepen the understanding of the first metatarsal head (FMH) morphological adaptation in different gait patterns. To this purpose three methods were introduced. The first served to compare the anthropometric linear and volumetric measurements of Homo naledi's MTPJ to that of 10 various athletes. The second was employed to measure curvature diameter in FMH's medial and lateral grooves for sesamoid bones. The third was used to determine the parallelism between medial and lateral FMH grooves. The anthropometric measurements of middle-distance runner to the greatest extent mimicked that of Homo naledi. Thus, it was used to successfully reconstruct the damaged Homo naledi's MTPJ. The highest curvature diameter of medial FMH groove was found in Homo naledi, while in lateral FMH groove it was the highest in volleyball player, suggesting their increased bear loading. The parallelism of medial and lateral FMH grooves was observed only in Homo naledi, while in investigated athletes it was dis-parallel. Athletes' dis-paralleled structures make first MTPJ simple flexion movement a complicated one: not rotating about one axis, but aboutmany, whichmay result in bringing a negative effect on running. In conclusion, the presented method for the reconstruction of the damaged foot bone paves the way for morphological and structural analysis of modern population and fossil hominins' gait pattern. © 2019 Fan, Antonijević, Antic, Li, Liu, Li, Djuric and Fan.

Multidetector computed tomography (MDCT) is often necessary to manufacture 3D-printed medical models (MMs) required for mandibular restoration due to trauma or malignant tumor. Although cone-beam computed tomography (CBCT) is a preferable method of mandibular imaging, additional scanning is often unjustified. To test whether a single radiologic protocol could be used for mandibular reconstructions, the human mandible was scanned with 6 MDCT and 2 CBCT protocols and later 3D-printed using a fused-deposition modelling technique. Then, we assessed linear measures on the mandible and compared them with MDCT/CBCT digital scans and 3D-printed MMs. Our data revealed that CBCT0.25 was the most precise protocol for manufacturing 3D-printed mandibular MMs, which is expected considering its voxel size. However, we noted that CBCT0.35 and Dental2.0H60s MDCT protocols were of comparable accuracy, indicating that this MDCT protocol could be a single radiologic protocol used to scan both donor and recipient regions required for mandibular reconstruction. © 2023 Lippincott Williams and Wilkins. All rights reserved.

Anatomy of frontal sinuses varies individually, from differences in volume and shape to a rare case when the sinuses are absent. However, there are scarce data related to influence of these variations on impact generated fracture pattern. Therefore, the aim of this study was to analyse the influence of frontal sinus volume on the stress distribution and fracture pattern in the frontal region. The study included four representative Finite Element models of the skull. Reference model was built on the basis of computed tomography scans of a human head with normally developed frontal sinuses. By modifying the reference model, three additional models were generated: a model without sinuses, with hypoplasic, and with hyperplasic sinuses. A 7.7 kN force was applied perpendicularly to the forehead of each model, in order to simulate a frontal impact. The results demonstrated that the distribution of impact stress in frontal region depends on the frontal sinus volume. The anterior sinus wall showed the highest fragility in case with hyperplasic sinuses, whereas posterior wall/inner plate showed more fragility in cases with hypoplasic and undeveloped sinuses. Well-developed frontal sinuses might, through absorption of the impact energy by anterior wall, protect the posterior wall and intracranial contents. © 2017 Pajic, Antic, Vukicevic, Djordjevic, Jovicic, Savic, Saveljic, Janovic, Pesic, Djuric and Filipovic.

Anatomy of frontal sinuses varies individually, from differences in volume and shape to a rare case when the sinuses are absent. However, there are scarce data related to influence of these variations on impact generated fracture pattern. Therefore, the aim of this study was to analyse the influence of frontal sinus volume on the stress distribution and fracture pattern in the frontal region. The study included four representative Finite Element models of the skull. Reference model was built on the basis of computed tomography scans of a human head with normally developed frontal sinuses. By modifying the reference model, three additional models were generated: a model without sinuses, with hypoplasic, and with hyperplasic sinuses. A 7.7 kN force was applied perpendicularly to the forehead of each model, in order to simulate a frontal impact. The results demonstrated that the distribution of impact stress in frontal region depends on the frontal sinus volume. The anterior sinus wall showed the highest fragility in case with hyperplasic sinuses, whereas posterior wall/inner plate showed more fragility in cases with hypoplasic and undeveloped sinuses. Well-developed frontal sinuses might, through absorption of the impact energy by anterior wall, protect the posterior wall and intracranial contents. © 2017 Pajic, Antic, Vukicevic, Djordjevic, Jovicic, Savic, Saveljic, Janovic, Pesic, Djuric and Filipovic.